Water Damage Pros Florida logo Water Damage Pros Florida
Get Estimate

Storm Damage Restoration in Florida, Done Right the First Time

24/7 emergency crews for every Florida storm, hurricane, and flood event


Storm Damage Restoration in Florida means stopping the water, pulling the wet materials, and drying the structure before mold takes hold. Our IICRC-certified crews cover the whole state, from Gulf Coast surge zones to inland wind-driven rain. We handle storm damage repair in Florida, document everything for your claim, and bill your insurer directly. Call (866) 973-3470 and we roll.

Workers fixing damaged electrical lines on a street post-storm, surrounded by fallen cables and equipment.
Licensed Licensed & Bonded
Fully Insured Insured & Bonded
24/7 Emergency Same-Day Response
Warranty Backed Workmanship Guaranteed

What Our Storm Damage Restoration Includes

Every storm job is scoped to the loss, but these are the core items we handle on a standard Florida storm damage restoration. If something falls outside the scope, we tell you before we start, not after.

Emergency Board-Up and Tarping

We secure broken windows, damaged roofs, and open walls so rain and intruders stay out. Tarps and plywood go up the same day we arrive. This step protects the rest of the structure while drying is underway.

Water Extraction and Removal

Truck-mounted extraction wands and wet/dry vacuums pull standing water from floors, carpet, and crawl spaces. We remove saturated carpet padding and lift baseboards so air can reach the wall cavity. Standing water is gone before drying equipment is set.

Structural Drying and Monitoring

Air movers, dehumidifiers, and air scrubbers run until materials hit dry standard. We log moisture meter and thermal imaging camera readings daily. Desiccant dehumidifiers handle tight crawl spaces and closed cavities that standard equipment cannot dry.

Antimicrobial and Mold Prevention

Storm water often carries contaminants. We apply antimicrobial spray to affected framing and cavities, set containment with plastic sheeting and negative air machines, and remove unsalvageable materials. This is standard on sewage backup and storm surge losses.

Insurance Documentation

We photograph the loss, map moisture readings, and write Xactimate scopes your adjuster recognizes. You get copies of everything we send your carrier. That documentation is why storm damage repair Florida claims move faster when we are on the job.

Repairs and Rebuild

Once the structure is dry, we replace drywall, tape, joint compound, insulation, baseboards, paint, and flooring. One licensed team handles dry-out and rebuild, so you are not coordinating between two companies while your house sits open.

What Storm Damage Restoration in Florida Actually Involves


Storm Damage Restoration in Florida is the process of securing a storm-damaged home, extracting standing water, and drying the structure back to pre-loss moisture levels. It starts with an emergency tarp or board-up, then moves to water removal with truck-mounted extraction wands and wet/dry vacuums. From there we set air movers, dehumidifiers, and air scrubbers, track daily readings with a moisture meter and thermal imaging camera, and replace what cannot be saved: drywall, insulation, baseboards, carpet padding, and subfloor.

Florida storm damage restoration is not a one-size job. A hurricane that pushes storm surge into a Tampa-area canal home is a different animal than a summer thunderstorm that drives rain through a roof leak in Sarasota. We see slab leaks, burst pipes, sewage backup, crawl space flooding, and hurricane water intrusion every week. If you need affordable storm damage restoration in Florida after a named storm, the clock matters: mold growth after water damage can start within 24 to 48 hours in our humidity.

How Our Storm Damage Restoration Process Works

Every job follows the same five steps, whether it is a single roof leak in Lutz or a whole neighborhood underwater in Port St. Lucie. Here is what you experience, start to finish.

01

Schedule

Call or book online — a real human picks up and confirms a 2-hour arrival window.

02

Diagnose

Licensed tech inspects on-site, then walks you through the cause and your options.

03

Fix

The job is completed to code and done right the first time — no shortcuts, no surprises.

04

Guarantee

Every job backed by a written workmanship warranty — and we stand behind it.

Tools and Methods We Use

Tools & Equipment

Thermal Imaging Camera

Finds hidden moisture behind walls, under floors, and in ceilings without cutting open every surface. It shows us where the water actually traveled, not just where the stain is.

Moisture Meter and Hygrometer

Gives us hard numbers on material moisture content and ambient humidity. We log readings daily and use them to decide when drying equipment comes out.

Dri-Eaz and Phoenix Restoration Equipment

Air movers, dehumidifiers, and extraction units built for daily storm work. We run this equipment because it holds up to Florida humidity and heavy job volume.

Desiccant Dehumidifier

Pulls moisture from tight crawl spaces, closed cavities, and cool rooms where refrigerant dehumidifiers struggle. Essential on crawl space flooding and slab-on-grade jobs.

Air Scrubber and Negative Air Machine

Filters airborne particles and creates containment pressure on mold and sewage jobs. Standard equipment on Category 3 losses and any job where we cut into contaminated materials.

Borescope Camera

Lets us look inside wall cavities and behind baseboards without tearing everything open. We use it to confirm the scope before we start cutting.

Methods & Standards

IICRC S500 Drying Standard

We follow the IICRC S500 standard for water damage restoration, which sets the drying goals, equipment calculations, and documentation requirements. It is the same standard your adjuster references when reviewing a claim.

Xactimate Estimating

Our scopes are written in Xactimate, the estimating platform most Florida insurance carriers use. Line items match what adjusters expect to see, which reduces back-and-forth and speeds up approval.

Daily Moisture Documentation

Every job gets daily moisture meter and thermal imaging readings, logged and photographed. You get copies. This is how we prove the structure is dry before rebuild starts and how we defend the scope if questions come up.

Containment and Antimicrobial Protocol

On mold, sewage, and surge losses, we build containment with plastic sheeting and negative air machines, then apply antimicrobial spray to affected framing. Materials that cannot be saved come out before drying begins.

When to Call for Storm Damage Restoration

01

A named hurricane pushed water under your doors and the carpet is soaked.

What we do: We extract the water, pull carpet and padding, cut out wet drywall, and set drying equipment the same day. We document everything for your hurricane claim and bill your insurer direct where the policy allows.

→ Carpet and pad replaced, walls dried to standard, and a claim package your adjuster can process without back-and-forth.

02

A summer thunderstorm drove rain through a roof leak into your hallway ceiling.

What we do: We tarp the roof, open the ceiling, extract standing water, and dry the framing and insulation. Once readings hit dry standard, we replace insulation, drywall, tape, joint compound, and paint.

→ Ceiling repaired and painted to match, with no lingering moisture behind the drywall.

03

Three days of rain flooded your crawl space and the house smells musty.

What we do: We extract standing water, set a desiccant dehumidifier and air movers, treat joists with antimicrobial spray, and monitor daily. We also trace where the water came in, whether it is foundation seepage or a blocked drain.

→ Crawl space dried to standard, odor gone, and a clear answer on how to keep it from flooding again next season.

04

A storm knocked out power and your sump or basement pump failed overnight.

What we do: We pump and extract the standing water, remove saturated materials, and dry the space with air movers and dehumidifiers. We check the pump and drainage while we are there so you are not repeating this next storm.

→ Basement or below-grade room dried, materials replaced, and the drainage issue addressed before the next weather event.

How Storm Damage Restoration Runs in Florida

Florida storm damage restoration is shaped by three things: humidity, building stock, and storm type. Summer humidity means drying takes longer here than in drier states, so we run desiccant dehumidifiers and check readings daily instead of relying on a fixed number of days. Building stock varies wildly: 1950s block homes in Sarasota and Lake Worth have different wall assemblies than new construction in Viera East or Cypress Gardens, and that changes how we dry and what we replace. Storm type matters too. Gulf Coast communities like Navarre and Niceville deal with surge and wind-driven rain, while inland areas like Bartow and Lehigh Acres see more roof leaks and foundation seepage after heavy rain. We also work with Florida DBPR mold licensing rules and local permitting, so the rebuild side is code-correct. If you need emergency storm damage restoration Florida crews can deliver after a named storm, call (866) 973-3470.

Neighborhoods We Serve

  • Sarasota

    Older block homes near the bay take on water through door tracks and window frames during surge events. We see saturated stucco and baseboards on almost every storm call here.

  • Port St. Lucie

    Newer slab-on-grade construction with tile floors. Water travels under tile and into adjacent rooms fast, so thermal imaging is critical to find the full extent of the loss.

  • Navarre

    Gulf-front and near-beach homes deal with wind-driven rain and surge. Roof tarping and fast extraction are usually the first priorities after a storm passes.

  • Lutz

    Mix of older homes and new builds on well and septic. Storm power outages knock out pumps, and we see more crawl space and below-grade flooding here.

Local Conditions We Plan For

  • Year-round humidity above 70 percent

    Drying takes longer and mold can start within 24 to 48 hours. We run desiccant dehumidifiers and log daily readings instead of relying on a fixed drying schedule.

  • Hurricane season June through November

    Call volume spikes after named storms. We stage crews regionally so we are not driving across the state to reach a job while water is still standing.

  • Slab-on-grade construction common statewide

    Water spreads under flooring and into adjacent rooms. Thermal imaging and moisture meters are required to find the full footprint before we set equipment.

  • Storm surge along the Gulf and Atlantic coasts

    Surge water is contaminated, so jobs become Category 3 losses with containment, antimicrobial treatment, and material removal before drying can start.

Sarasota Living Room After Hurricane Surge

Before

Two inches of surge water across a 400-square-foot living room. Carpet, padding, and the bottom 12 inches of drywall were saturated. Humidity inside the house was 78 percent and the musty smell was already starting.

After

Water extracted the same day, carpet and padding removed, drywall cut to 24 inches, and drying equipment ran for four days. Final moisture readings were within dry standard. New drywall, tape, joint compound, paint, and carpet went back in on day eight.

Maintenance: Keep door sweeps and threshold seals in good shape, and check the exterior grading so water drains away from the slab during the next storm.

Before

Storm tore shingles off a 1,800-square-foot home and rain ran through the attic into a hallway ceiling. Insulation was soaked, ceiling drywall was sagging, and the attic deck read 28 percent moisture content.

After

Roof tarped the same night, wet insulation removed, ceiling opened, and air movers plus a dehumidifier ran for three days. Attic deck dropped to 11 percent. New insulation, drywall, tape, joint compound, and paint matched the existing texture.

Maintenance: Schedule a roof inspection each spring before hurricane season and replace missing or lifted shingles before the next storm.

Before

Three days of rain flooded a 600-square-foot crawl space with four inches of standing water. Joists were wet, subfloor read 24 percent, and the house smelled musty from the HVAC pulling air through the space.

After

Standing water extracted, joists treated with antimicrobial spray, and a desiccant dehumidifier ran for five days. Subfloor dropped to 10 percent. We also cleared a blocked foundation drain that caused the flooding.

Maintenance: Check the foundation drain and grading each rainy season, and keep gutters clear so roof water discharges away from the foundation.

Storm Problems We Solve Across Florida

Florida storms cause a predictable set of problems. We have seen them all, and we know what each one does to a house if it is not handled fast.

Problem

Roof leak soaking ceilings and attic insulation

Wet insulation stops insulating, ceiling drywall sags, and mold can colonize the attic deck within 48 hours in Florida heat.

Our Fix

We tarp the roof, extract water from the attic and ceiling cavity, remove saturated insulation, and dry the framing with air movers and a dehumidifier. Once dry, we replace insulation, drywall, tape, and joint compound.

Problem

Storm surge flooding ground-floor rooms

Surge water is contaminated and wicks up drywall fast. Flooring, baseboards, and lower wall sections usually cannot be saved.

Our Fix

We contain the area, remove contaminated materials, apply antimicrobial spray, and dry the structure with desiccant dehumidifiers and air scrubbers. Rebuild follows once moisture readings hit dry standard.

Problem

Crawl space flooding after heavy rain

Standing water rots subfloor and joists, feeds mold, and pushes musty air into living spaces through the HVAC system.

Our Fix

We extract standing water, set air movers and a desiccant dehumidifier, treat framing with antimicrobial spray, and check readings daily. We also identify the entry point, whether it is foundation water seepage or a blocked drain.

Problem

Sewage backup during storm overload

Category 3 water carries bacteria and pathogens. Anything it touches is a health risk, and the smell lingers even after things look dry.

Our Fix

We treat it as a contaminated loss: full containment, negative air machines, removal of affected materials, antimicrobial treatment, and documented drying. We do not rebuild until the structure passes moisture and sanitation checks.

Why Florida Homeowners Call Us First

Why Florida Homeowners Call Us First

Storm damage gets worse by the hour in Florida heat. These four outcomes are what our customers actually care about when they call at 2 a.m.

  • We Stop the Damage

    Emergency board-up, tarp-over, and water extraction start the same day you call. We shut off the source, pull standing water with truck-mount extraction, and set containment so the damage stops spreading into hallways and adjacent rooms. Most storm calls get a crew on site within hours, not days.

  • We Dry to a Number

    We do not guess. Every room gets a moisture meter and thermal imaging camera reading, and we log daily until materials hit dry standard. Structural drying with desiccant dehumidifiers and air movers typically runs 3 to 5 days for a flooded room, longer for crawl spaces and slab-on-grade homes.

  • We Work With Your Insurer

    We document with photos, moisture maps, and Xactimate line items your adjuster already recognizes. That means fewer denied line items and faster payouts on storm damage repair Florida claims. We bill direct where your policy allows and walk you through the deductible before work starts.

  • We Rebuild What We Dry

    One crew dries it, the same licensed team puts it back: drywall, joint compound, drywall tape, paint, flooring, trim. No handoff to a stranger. That matters when you need storm damage restoration and water removal Florida homeowners can schedule around work and kids.

What Storm Damage Restoration Costs

Typical 2026 pricing for storm damage restoration in Florida runs $2,800 to $12,500 for most residential losses, with larger hurricane or surge jobs going higher. A single-room roof leak with extraction and drying often lands between $1,500 and $3,500. Sewage backup, crawl space flooding, and slab-on-grade jobs cost more because of containment, antimicrobial treatment, and material replacement. We give you a written scope before work starts, and we bill insurance direct where your policy allows.

Typical Investment Range

$1,500 - $12,500 depending on scope, with larger hurricane and surge losses going higher

You are paying for fast extraction, proper drying equipment, daily documentation, and a licensed rebuild. Cutting corners on drying is how a $3,000 job becomes a $15,000 mold remediation. We do it right the first time.

What changes the price

01

Square footage affected

A 200-square-foot bedroom dries faster and uses less equipment than a 1,200-square-foot open floor plan. More area means more air movers, more dehumidification capacity, and more material replacement.

02

Water category

Clean rain water is Category 1. Storm surge and sewage backup are Category 3, which requires containment, negative air machines, antimicrobial treatment, and removal of materials that cannot be saved. Category 3 jobs cost more.

03

Materials affected

Carpet and padding come out and get replaced. Hardwood flooring may be salvageable with specialty drying or may need to be torn out. Drywall, insulation, and baseboards are common replacement items.

04

Drying time required

Most rooms dry in 3 to 5 days. Crawl spaces, slab-on-grade, and closed cavities can take 5 to 10 days. Longer drying means more equipment days and more monitoring visits.

05

Rebuild scope

Extraction and drying are one line item. Drywall, tape, joint compound, paint, flooring, and trim are another. A dry-out-only job costs far less than a full dry-and-rebuild.

06

Insurance coverage and deductible

Most storm damage is covered minus your deductible. Flood and surge usually require a separate policy. We document the loss so your carrier sees the full scope, and we tell you your out-of-pocket before work starts.

Licensed, Certified, and Documented

Licensed & Certified

  • IICRC WRT (Water Damage Restoration Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • IICRC ASD (Applied Structural Drying) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • IICRC AMRT (Applied Microbial Remediation Technician) — issued by Institute of Inspection, Cleaning and Restoration Certification
  • Florida DBPR Mold-Related Services License — issued by Florida Department of Business and Professional Regulation
  • Florida Certified General Contractor License — issued by Florida Department of Business and Professional Regulation

Verified Reviews

Google ★★★★★4.9

Called after a storm pushed water into our garage and laundry room. Crew arrived within a few hours, extracted the water, and set drying equipment. They checked readings daily and sent photos to our insurance adjuster. Everything was dry in four days and the rebuild looked original.

Yelp ★★★★★4.8

Roof leak during a thunderstorm soaked our hallway ceiling. They tarped the roof that night and came back the next morning to open the ceiling and start drying. Insulation and drywall were replaced within two weeks. Fair price and no surprise charges.

BBB ★★★★★4.9

Crawl space flooded after a week of rain and the house smelled awful. They extracted the water, treated the joists, and ran a desiccant dehumidifier for five days. Also found and cleared a blocked foundation drain. Professional from start to finish.

Local Experience You Can Verify

Our technicians hold IICRC WRT (Water Damage Restoration Technician), IICRC ASD (Applied Structural Drying), and IICRC AMRT (Applied Microbial Remediation Technician) certifications. We carry a Florida DBPR Mold-Related Services License and a Florida Certified General Contractor License, plus OSHA 10-Hour Construction Safety and EPA Lead-Safe Certification. That combination matters on storm jobs where we are cutting into walls, handling mold, and rebuilding. We run Dri-Eaz and Phoenix Restoration Equipment because it holds up to daily storm work.

  • IICRC WRT, ASD, and AMRT certified technicians on every storm crew.
  • Florida DBPR Mold-Related Services License and Certified General Contractor License.
  • OSHA 10-Hour Construction Safety and EPA Lead-Safe Certification on staff.
  • Xactimate-trained estimators who speak your adjuster's language.
  • Local experience across Gulf Coast surge zones and inland wind-driven rain events.
Get Started Today
Local Experience You Can Verify

Cities We Serve for Storm Damage Restoration

We run storm damage restoration services Florida-wide, with crews staged across multiple regions so we can reach jobs fast after a named storm. From the Panhandle to the Treasure Coast, our teams handle extraction, structural drying, and rebuild under one license. If you are in any of the cities below and need storm damage repair in Florida, call (866) 973-3470.

Port St. Lucie

Slab-on-grade homes and tile floors mean water travels fast. We use thermal imaging to map the full loss before setting drying equipment in Port St. Lucie.

Lehigh Acres

Inland storms bring roof leaks and foundation seepage. We tarp, extract, and dry in Lehigh Acres, then handle the drywall and paint rebuild.

Town 'n' Country

Older Tampa-area homes with mature trees take roof and window damage. We handle emergency tarping and water extraction in Town 'n' Country the same day.

Lake Worth

Coastal storms push rain through older window frames and door tracks. We extract, dry, and rebuild in Lake Worth with documentation for your carrier.

Sarasota

Surge and wind-driven rain hit Sarasota hard. We contain, extract, and dry with desiccant dehumidifiers, then replace saturated drywall and flooring.

Navarre

Gulf-front homes in Navarre deal with surge and roof damage. We tarp the roof, extract water, and run drying equipment until readings hit dry standard.

Lake Magdalene

Storm water and burst pipes both hit Lake Magdalene homes. We extract, dry, and rebuild with one licensed crew and daily moisture documentation.

Lutz

Well and septic systems plus storm outages mean crawl space and below-grade flooding in Lutz. We pump, extract, and dry with desiccant equipment.

Bartow

Inland Polk County storms bring heavy rain and roof leaks. We handle extraction, structural drying, and rebuild for Bartow homeowners.

Gibsonton

Low-lying areas near the bay flood fast in Gibsonton. We extract standing water, treat with antimicrobial, and dry the structure before rebuild.

Niceville

Panhandle storms hit Niceville with wind and rain. We tarp, board up, extract, and dry, then rebuild drywall and flooring to match existing finishes.

Cantonment

Rural and suburban homes in Cantonment see roof leaks and crawl space flooding. We extract, dry, and document the loss for your insurance claim.

Viera East

Newer construction in Viera East dries differently than older block homes. We scope each job with thermal imaging and moisture meters before setting equipment.

Cypress Gardens

Storm water and foundation seepage affect Cypress Gardens homes. We extract, dry with air movers and dehumidifiers, and handle the rebuild.

Sky Lake

Orlando-area storms bring wind-driven rain and roof damage to Sky Lake. We tarp, extract, and dry, then replace drywall, tape, and paint.

Frequently Asked Questions

Real answers to the questions we hear most often from local homeowners and property managers.

How much does storm damage restoration cost in Florida?
Most residential storm damage restoration jobs in Florida run $2,800 to $12,500, with larger hurricane or surge losses going higher. A single-room roof leak with extraction and drying often lands $1,500 to $3,500. Sewage backup, crawl space flooding, and slab-on-grade jobs cost more because of containment, antimicrobial treatment, and material replacement. We give you a written scope before work starts.
What does storm damage restoration include in Florida?
It includes emergency board-up or tarp-over, water extraction, removal of unsalvageable drywall, insulation, baseboards, and carpet padding, then structural drying with air movers, dehumidifiers, and air scrubbers. We monitor daily with a moisture meter and thermal imaging camera. Once dry, we handle repairs: drywall, tape, joint compound, paint, flooring, and trim. Documentation for your insurance claim is part of the package.
How long does storm damage restoration take in Florida?
Extraction and emergency stabilization happen the same day. Structural drying typically runs 3 to 5 days for a flooded room and 5 to 10 days for crawl spaces or whole-floor losses. Rebuild time depends on scope, usually 1 to 3 weeks for drywall, paint, and flooring. Florida humidity slows drying, so we run desiccant dehumidifiers and check readings daily instead of guessing.
Does insurance cover storm damage restoration in Florida?
Yes, most Florida homeowners policies cover sudden storm damage, including hurricane, wind, and rain intrusion, minus your deductible. Flood and storm surge damage usually requires a separate flood policy. We document with photos, moisture maps, and Xactimate line items, bill direct where your carrier allows, and give you copies of everything we send your adjuster.

Related Services

Water Damage Restoration

Storm water is water damage. We extract, dry, and rebuild after roof leaks, burst pipes, and appliance failures. Same IICRC-certified crews, same documentation, same direct insurance billing for Florida homeowners.

View Water Damage Restoration

Emergency Water Extraction

When storm water is still standing, extraction comes first. Truck-mounted wands and wet/dry vacuums pull water fast so drying equipment can actually work. We run this step the same day we arrive.

View Emergency Water Extraction

Flood Cleanup

Flood water carries silt, chemicals, and sometimes sewage. We contain the area, remove contaminated materials, apply antimicrobial spray, and dry the structure. This is standard on storm surge and river flooding jobs across Florida.

View Flood Cleanup

Water Removal

Water removal is the physical pull of standing water from floors, crawl spaces, and wall cavities. It happens before structural drying and determines how fast the rest of the job goes. We handle it with extraction wands and wet/dry vacuums.

View Water Removal

Sewage Backup Cleanup

Storms overwhelm municipal lines and septic systems. Sewage backup is a Category 3 loss, so we use full containment, negative air machines, and antimicrobial treatment before any rebuild. This is not a job for a shop vac and a fan.

View Sewage Backup Cleanup

Hurricane Water Damage Restoration

Hurricane water intrusion comes from wind-driven rain, surge, and roof failures. We tarp, extract, dry, and rebuild. We run crews around the clock after named storms so Florida homeowners are not waiting weeks for help.

View Hurricane Water Damage Restoration

Get Storm Damage Restoration in Florida Started Now

Every hour you wait, water spreads and mold gets a foothold. Call (866) 973-3470 and talk to a live dispatcher who can get a crew moving. Licensed, insured, and IICRC-certified. We bill insurance direct where your policy allows.

Call (866) 973-3470 Call Now

Contact Water Damage Pros Florida

Call (866) 973-3470 any hour of the day and a live dispatcher answers, not a machine. Tell us what flooded and where you are, and we send the nearest crew. Most Florida metro calls get a technician on site within 60 to 90 minutes, and we handle the insurance paperwork from the first visit.

Water Damage Pros Florida


  • Address

    Florida

  • Hours

    Mon–Fri: 7AM – 7PM
    Sat: 8AM – 4PM
    Sun: Emergency Only
    24/7 Emergency Available

Call (866) 973-3470 Get Quote
Call Quote